1、近五年来参加的学术研究课题：
[1] 机电产品创新设计的理论、方法、技术及其应用的研究，国家自然科学基金
[2] 汽车配套件快速响应客户需求的协同设计和制造支持平台的研发与应用，国家科技攻关计划
[3] 大规模客户化产品协同设计系统和机械广义优化设计系统，863计划
2、学术论文：
[1] Li, Yefei, Xu, XiangHong. Grid environment for fabricating custom artificial human bone. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), v 4496 LNAI, Agent and Multi-Agent Systems: Technologies and Applications - First KES International Symposium, KES-AMSTA 2007, Proceedings, 2007, p237-247 (EI Compendex:080811113455)
[2] Li, Fangyu, Li, Yefei, Sun, Shouqian, et al. A medical aided system for evaluating crura rehabilitation. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), v 4496 LNAI, Agent and Multi-Agent Systems: Technologies and Applications - First KES International Symposium, KES-AMSTA 2007, Proceedings, 2007, p468-476 (EI Compendex:080311034301)
[3] 黎业飞,邱清盈,冯培恩等. 基于刚-柔混合建模的时变结构动力学分析.浙江大学学报（工学版）,2007,(2):311-314 (EI Compendex:071710573695)
[4] 张小明,邱清盈,冯培恩,黎业飞. 基于ANSYS和VB.Net的钻夹头高效率强度分析系统.机床与液压,2007,(1):11-13,29
[5] Li, Yefei, Qiu, Qingying, Feng, Pei-En. E-learning in structure design and analysis: Opportunities and challenges. Journal of Computational Information Systems, v2, n1, March, 2006, p297-302 (EI Compendex:063110045026)
[6]李芳宇,孙守迁,黎业飞等. 基于随机有限元的产品接触曲面形状的人机优化研究.中国机械工程
[7]Li, Yefei, Xu, Xianghong, Qiu, Qinying. FEM-based structure optimization with grid-enabled analysis environment. Proceedings of the World Congress on Intelligent Control and Automation (WCICA), v 2, Proceedings of the World Congress on Intelligent Control and Automation (WCICA), 2006, p6915-6919 (EI Compendex:071510543824)
[8] 卢骥,邱清盈,冯培恩,黎业飞等. 钻夹头扳手锥齿轮有限元建模与强度分析.组合机床与自动化加工技术,2006,(7):4-6
[9] 黎业飞,邱清盈,冯培恩等. 基于Internet的有限元远程分析技术研究.计算机集成制造系统,2003,(12):1132-1135 (EI Compendex:04158112673)
[10] 杨友明,黎业飞,陈应华等. 游梁式抽油机CAD系统.钻采工艺,2002,(6):60-6 |
